How to choose chicken layer cages?

1. The angle of the egg roll design at the bottom of the laying hen cage. The angle of the bottom of the chicken cage should be accurate. The small angle cannot roll out the eggs in time, which may be trampled by the chickens. The large angle is easy to fall to the ground and break or cause the eggs to roll with a large impact and smash each other. The slope of the cage bottom should be kept at 7-8 degrees.
2. The spacing of the iron bars at the bottom of the cage. This indicator of chicken cages is also very important. Generally, the recommended spacing is 2.5 cm × 5 cm. It is wrong to think that the size of the broiler breeder can increase the spacing. It is recommended to lay a plastic mesh at the bottom of the cage for the qualified chicken farm. Practice has proved that the plastic net can buffer the strength of eggs hitting the net and rolling down to the bottom of the net, which not only greatly reduces the egg breaking rate, but also reduces the incidence of leg disease and pleurisy.
3. Pay attention to the connection between the chicken cage and the bottom net between the chicken cage. Here, buyers need to be reminded to pay attention to the treatment of the connection between the chicken cage and the bottom net of the chicken cage. It must be done finely, and no large gap should be left, because there are many eggs that fall here. If you don't pay attention to this detail when you buy the chicken coop, then we recommend that you use plastic cable ties, thin wires or strings for crisscross winding, and wooden or iron baffles can be added to the cages at both ends of the chicken coop. Prevent rolling to the ground.
4. Material selection of chicken cage. The selection of materials for making chicken cages is very particular. It is necessary to choose suitable and tough materials. The diameter of the iron wire at the bottom of the cage is about 2 mm, and the egg breaking rate is the smallest. The larger the wire diameter, the easier it is to cause broken eggs.