Hot products incubator 1

There are many types of incubators, although the degree of automation and capacity are different, but their structural principles are the same. They are mainly composed of the body, the active temperature control device, the active humidity control device, the active egg turning device and the ventilation device. . Box-type incubators (also called electric incubators) are widely used. According to their capacity, this type of incubator can be divided into three specifications: large, medium and small, and its capacity is distinguished from 50,000 to 100,000 or more. Between 10,000 and 50,000, and less than 10,000, in small and medium-sized incubators, the hatching and hatching parts are installed in the same body.

main feature
1. The box body is assembled by color steel plate, and the appearance is beautiful and generous.
2. The fully automatic all-in-one machine for hatching and hatching can incubate in batches.
3. Using imported temperature and humidity sensors, reliable and accurate temperature and humidity control.
4. Scientific circulation ventilation system.
5. Stable and reliable automatic egg turning mechanism, manual and automatic users can choose at will.
6. The advanced ultrasonic atomization head makes the humidity more stable.
7. Matching egg tray, hatcher tray (chicken, duck, goose, pigeon, turkey, etc.)

1. Incubator weekly maintenance content 1. Check the water level of the humidification drip tray. 2. Check the sealing condition of the door. 3. Check the ventilation and exhaust conditions. 4. Clean the fluff and other debris on the rotating screw of the air door to prevent it from getting stuck. 5. Wipe the outside of the chassis and control cabinet with a semi-dry rag; clean the humidifying basin for each batch of the hatcher. And clean the fluff on the top of the machine.
2. Incubator monthly maintenance content 1. Check whether the fan, humidification and egg turning chain are in good condition. 2. Check the heating function. 3. Check the ultra-high temperature alarm function. 4. Check whether the egg turning function is normal. 5. Thoroughly clean and disinfect equipment. 6. After incubating each batch, the machine, humidification basin and humidification evaporation pan must be cleaned.
3. The incubator maintains content every three months. Clean the probe. 2. Calibration temperature and humidity. 3. Grease the fan bearing once. 4. Clean the egg-turning worm wheel with oil and lubricate it with butter. 5. Grease the screw and sliding fitting parts of the damper mechanism. 6. Change the oil for humidification and egg turning reducer. 7. Comprehensively check the control functions of each system.
4. Maintenance when the incubator is not used for a long time. Before the machine is left unused for a long time, the drying machine must be turned on to heat up, and the water in the humidification basin must be drained and dried. After washing each part of the operation, use butter to protect it Rusty. This is very important. You decide not to use a certain machine, but do not follow the above methods to maintain it, then when you want to use it next time, it may fail a lot and fail to work.