Introduction of incubator3 -Method of operation

Flip egg settings
Press the "set and decrease keys" at the same time. The instrument displays ppp and don't raise your hand. Press the "-" key again to display F1 raise your hand. The 3 digits displayed on the left are the cumulative times of turning eggs, which will be lost if power outages, and the times of turning eggs will start from zero. Press the "-" key to clear the number of times of turning eggs.
Then press the "Settings" key. The instrument displays F2 and raises the hand. The 3 digits indicate the egg turning cycle time (in hours). The factory set time is 1.5 hours. If you need to change it, please press the "+" or "-" key to adjust it. The figures show the value you need. Turn the egg turning cycle to zero without turning the egg.
Then press the "Settings" key, the instrument displays F3 and raises the hand, and the display 3 digits is the egg turning time (in seconds). The factory setting is 180 seconds. If you need to change it, please press the "+" or "-" key to adjust so that the number displays the value you need.
Then press the "Settings" key. The instrument displays F4 and raises the hand, and displays 3 digits as the ventilation cycle (in hours). The factory default is 0 hours, if you need to change, please press the "+" or "-" key to adjust so that the number displays the value you need. The ventilation cycle is adjusted to zero without ventilation.
Then press the "Settings" key. The instrument displays F5 and raises the hand, and it displays 3 digits as the ventilation time (in seconds). The factory setting is 30 seconds, if you need to change it, please press the "+" or "-" key to adjust so that the number displays the value you need.
(The main function of turning the egg is to avoid adhesion between the embryo and the egg membrane. The yolk is lighter than the egg white, and the embryo is lighter than the egg yolk. The embryo is normally in contact with the egg membrane. When turning the egg, the position of the egg is changed, and the contact point between the embryo and the egg membrane is also changed. Therefore, the adhesion between the embryo and the egg membrane is avoided. The frequency of turning the eggs is once every half an hour. After 17 days, there is no need to turn the eggs, and the breeding eggs are transplanted to the hatching area.)