Feeding system

Automatic feeding tray
• Recommended every 50-7

Generally speaking, we recommend the use of pan feeders, because using the entire feeder can make
The flock of chickens move freely in the house to reduce feed leakage and optimize feed transfer.
Exchange rate.
The feed pan should be filled with feed every time you enter the chicken house to ensure that the system is full.
If chickens have to "tilt" the feed pan to eat the feed, it means that the feed pan is hanging too high.

Chain feeder

It may be suspended or bracket type. The suspended feeding system is easier to adjust.
• The feeding space should be at least 2.5 cm-4 cm per bird.
• The height of the edge of the feeding trough must be the same as the height of the chicken's back.
• If the height of the feeder is not adjusted accordingly with the development of the chicken, the feeder may become a broiler
Obstacles to walking.

The height of the feed in the trough should be controlled by the feed slide in the hopper, and it must be closely
Monitor to avoid feed waste.
• Periodic maintenance of the trough during the empty house period-routine maintenance of corners and chain tightness
It is important to prevent damage.
• When using pelleted feed, the feed depth should be reduced to 1 cm on the chain.
• Chain speed is very important for uniformity-18 m/min is recommended for broilers.
• When more than one material line, the other material line should circulate in the opposite direction.
Silo
• The volume of the silo should be equivalent to the feed consumption in 5 days.
• In order to reduce feed mildew and bacterial growth, the silo must be impermeable to water.
• It is recommended that each chicken house should be equipped with two silos so that the feed can be changed quickly when needed.
Type of feed (such as changing from mid-term feed to late-term feed, using a medicated feed, or transferring
Becomes a withdrawal period).
• The silos between each batch of flocks should be cleaned.